Low Cost Voltage Output Single Axis Tilt Sensor
Introduction
ER-TS-5140VO Series tilt sensor is a low-cost single-axis voltage output inclination sensor. The output voltage is 0~5V, 0.5~4.5V and 0~10V is optional. It is mainly aimed at the application market where the volume and cost are highly limited. Due to the built-in inclination unit of a new generation of MEMS production process, the finished product is small in size and low in power consumption. The consistency and stability of the MEMS process is very high, and its working temperature reaches industrial grade -40~+85℃, which is a cost-effective tilt module.
The product adopts the principle of non-contact measurement, which can output the current attitude and inclination in real time. The operation is simple, there is no need to look for two surfaces with relative changes. It has the characteristics of small size and strong shock and vibration resistance, especially suitable for harsh industrial environments.
Featuers
Single axis tilt monitoring
Full range accuracy 0.3°, resolution 0.05°
Output: 0-5V, 0.5~4.5V, 0-10V (optional)
Wide voltage input DC 9~36V
Wide temperature working -40~+85℃
Measuring range: 0~±180°(optional)
High vibration resistance>2500 g
IP67 protection
Industrial design
Small volume (55*37*24mm) (customizable)
Applications
Intelligent power transmission line
Aerial work truck
Tractor, deep farming machinery
Mining machinery, oil logging equipment
Medical equipment
Tripod head levelling
Hydraulic lifting platform
Inclination monitoring
Angle control of various construction machinery
Inspection of bridges and dams
Specifications
Parameters | Conditions | ER-TS-5140VO-10 | ER-TS-5140VO-30 | ER-TS-5140VO-60 | ER-TS-5140VO-90 | Unit |
Measuring range | / | ±10 | ±30 | ±60 | ±90 | ° |
Measuring axis | Y-axis is optional | X | X | X | X | / |
Zero temperature drift | -40~85° | ±0.05 | ±0.05 | ±0.05 | ±0.05 | °/℃ |
Sensitivity temperature coefficient | -40~85° | ≤200 | ≤200 | ≤200 | ≤200 | ppm/℃ |
Zero drift | 0° output | 0~5Voutput -2.5V, 0~10V output -5V | V | |||
Frequency response | DC response | 100 | 100 | 100 | 100 | Hz |
Resolution | Bandwidth 5Hz | 0.05 | 0.05 | 0.05 | 0.05 | ° |
Accuracy | -40~85℃ | 0.3 | 0.3 | 0.3 | 0.3 | ° |
Long term stability | -40~85℃ | <0.32 | ° | |||
Power on time | / | 0.2 | 0.2 | 0.2 | 0.2 | s |
Response time | / | 0.01 | 0.01 | 0.01 | 0.01 | s |
Average failure-free work | ≥55000hours/time | |||||
Output mode | 0-5V, 0.5~4.5V, 0-10V | |||||
Shock resistance | 2500g, 0.5ms, 3 times/axis | |||||
Anti-vibration | 10grms, 10~1000Hz | |||||
Insulation Resistance | ≥100MΩ | |||||
Waterproof level | IP67 | |||||
Cables | Standard 1.5M length, wearproof, grease proofing, wide temperature, shielded cables6*0.3mm² | |||||
Weight | 55g (without packing box) |
Application Techniques
1.The Difference between Tilt Sensor and Gyro Sensor
3.How to install the tilt sensor?
4.What are Tilt Switches and Tilt Sensors?
5.How to Use the Tilt Sensor and How to Install It?
6.Do you Know the Working Principle of Inclinometer ?