Triaxial Quartz Accelerometer
ER-3QA-02E (3×10-5~1×10-4g) Features:
1. High performance 3-Axis;
2. Digital output;
3. Low power consumption.
Robot Joint Reducer Selection Table
ER-RJR-E/N Series Features:
1. New transmission;
2. Overcomes the drawback of stylus pendulum drive;
3. Small volume, light weight, large range of transmission ratio;
4. Long service life, stable precision, high efficiency, smooth transmission.
Current Type Non-Contact Angle Sensor
ER-AS-18 Features:
1. Sampling rate: 1K HZ;
2. Full range accuracy 0.1°;
3. Output 4~20mA, 0~20mA optional.
Digital Non-Contact Angle Sensor
ER-AS-16 Features:
1. Sampling rate: 1K HZ;
2. Full range accuracy 0.3°;
3. Output RS232, RS485, TTL and MODBUS are optional.
Voltage Type High Precision Contactless Angle Sensor
ER-AS-20 Features:
1. Sampling rate: 1K HZ;
2. Full range accuracy 0.1°;
3. Output 0~5V, 0~10V optional.
Touch Angle Digital Display
ER-DDTS-23 Features:
1. High resolution;
2. Sampling rate: 100HZ;
3. 4.3-inch LCD touch screen display.
High-Precision CAN Bus Non-Contact Angle Sensor
ER-AS-25 Features:
1. Output CAN bus;
2. Sampling rate: 1K HZ;
3. Full range accuracy 0.05°.
Digital Type High Precision Contactless Angle Sensor
ER-AS-26 Features:
1. Sampling rate: 1K HZ;
2. Full range accuracy 0.05°;
3. Output RS232, TTL, RS485, MODBUS optional.
Programmable AC Power Source
ER-PS-SW Series Features:
1. 10 memory locations for easy test setup and recall;
2. Double protection with hardware and software;
3. Free instrument control software available;
4. Simulate transient conditions;
5. Programmable starting, voltage and current limit;
6. LCD to monitor voltage, current, frequency, power and power factor;
7. Built-in RS232, RS485, communication port, suitable for remote monitoring;
8. Capable for each phase unbalance loads.
Tilt Display Instrument
ER-DDTS-25 Features:
1. 7-inch LCD touch screen display;
2. High resolution;
3. Sampling rate: 100HZ.
Digital Type Single Axis Tilt Sensor
ER-TS-3166DI Features:
1. Single axis tilt monitoring;
2. Output frequency 5~100HZ (optional);
3. Full range accuracy 0.01°, resolution 0.001°.
Current Type High Precision Contactless Angle Sensor
ER-AS-28 Features:
1. Sampling rate: 1K HZ;
2. Full range accuracy 0.1°;
3. Output 4~20mA, 0~20mA optional.
Voltage Type Single-Axis Single-Way Tilt Switch
ER-TS-02 Features:
1. Range 0~±180°(optional);
2. High vibration resistance >3500 g;
3. Full range accuracy 0.1°, resolution 0.01°.
High Precision Current Output Type Single Axis Tilt Sensor
ER-TS-3168CU Features:
1. Single axis tilt monitoring;
2. Full range accuracy 0.01°, resolution 0.001°;
3. Output 4~20mA, 0~20mA, 0~24mA (optional).
Voltage Type Single-Axis Dual-Way Tilt Switch
ER-TS-03 Features:
1. Range 0~±180°(optional);
2. Wide voltage input DC 9~36V;
3. Full range accuracy 0.1°, resolution 0.01°.
Relay Type Two-Axis Single-Way Tilt Switch
ER-TS-04 Features:
1. Range 0~±90°(optional);
2. Full range accuracy 0.1°, resolution 0.01°;
3. Alarm threshold can be set by the users.
High Performance Relay Type Single-Axis Dual-Way Tilt Switch
ER-TS-05 Features:
1. Range 0~±180°(optional);
2. Full range accuracy 0.1°, resolution 0.01°;
3. Wide operating temperature -40~+85℃.
Voltage Type Two-Axis Two-Way Tilt Switch
ER-TS-06 Features:
1. Range 0~±90°(optional);
2. Full range accuracy 0.1°, resolution 0.01°;
3. Alarm threshold can be set by the users.
Low-Cost Voltage Type Single Axis Tilt Sensor
ER-TS-4150VO Features:
1. Single axis tilt monitoring;
2. Output: 0-5V, 0.5~4.5V, 0-10V (optional);
3. Full range accuracy 0.1°, resolution 0.01°.
Voltage Type 2-Axis Single-Way Tilt Switch
ER-TS-07 Features:
1. Range 0~±90°(optional);
2. Full range accuracy 0.1°, resolution 0.01°;
3. Alarm threshold can be set by the users.
Voltage Type Double Axis Tilt Switch
ER-TS-08 Features:
1. Range 0~±90° (optional);
2. Wide temperature working -40~+85℃;
3. Full range accuracy 0.05°, resolution 0.01°.
Uniaxial Tilt Sensor CANopen Output
ER-TS-4155CA Features:
1. Single axis tilt monitoring;
2. Full range accuracy 0.1°, resolution 0.01°;
3. Wide voltage input DC 9～36V.
Relay Type Single-Axis Dual-Way Tilt Switch Single Board
ER-TS-09 Features:
1. Wide voltage input DC 9~36V;
2. Range 0~±180°(optional);
3. Full range accuracy 0.1°, resolution 0.01°.
Digital Output Single Axis Tilt Sensor
ER-TS-4156DI Features:
1. Single axis tilt monitoring;
2. Wide voltage input DC 9~36V;
3. Full range accuracy 0.1°, resolution 0.01°.